Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
O
Sub-Bright Adjustment(Option)
1) Tune the TV set to receive a EU 05 CH. 2) Enter WB mode by pressing the IN_START & �4� button. Adjust S-BRI data until 100% and 80% GRAY PATTERN is classified. (Use F , G , D ,E, OK buttons)
Fifth Vertical Line 100% and 80% GRAY PATTERN
SUB BRIGHT Adjustment Signal
O
Auto-Convergence Check (option)
1) Check the Auto-Convergence in PAL/NTSC mode separating. 2) Press the IN_START key on R/C for adjustment and press the Time key to check whether Auto-Convergence works normally in each mode. 3) If not,check the Convergence condition or Measuring condition and SENSOR condition. 4)The shipment must be done after restoring the final auto convergence data value. (Restore a Convergence data : IN_START -> �3� -> TEXT)
O
Check the Option Adjustment
1) Check the OPTION1~5 data of attach 6 is well recorded. 2) The option value of each suffix is started on JOB EXP of 3141VMN chassis Assy.
